mirror of
https://github.com/wh201906/Proxmark3GUI.git
synced 2025-03-01 20:41:32 +08:00
45 lines
1.7 KiB
Markdown
45 lines
1.7 KiB
Markdown
# Quickstart
|
|
|
|
[中文教程](quickstart_zh_CN.md)
|
|
***
|
|
**On Windows**
|
|
***
|
|
## Use GUI with included client
|
|
(1) Download the GUI with included client on [release](https://github.com/wh201906/Proxmark3GUI/releases) page
|
|
|
|
|
|
(2) Extract the .7z file to a path. The target path should not contain non-ASCII characters
|
|
|
|
|
|
(3) Open Proxmark3GUI.exe in the GUI folder, then select the language and click "OK". Now you can use it
|
|
|
|
|
|
|
|
## Use the GUI with your own client
|
|
(1) Download the standalone GUI on [release](https://github.com/wh201906/Proxmark3GUI/releases) page
|
|
|
|
|
|
(2) Extract the .7z file to a path. The target path should not contain non-ASCII characters. Make sure the client path and the GUI path are different.
|
|
|
|
(3) Open the GUI. Input the client path in the "Client Path" editbox on the top of the main window.
|
|
|
|
|
|
(4) Go to "Settings" panel. Input the config file path which matching the client you use.
|
|
|
|
|
|
(5) If setup.bat is required, input the script path in the "Preload script path" editbox.
|
|
|
|
|
|
(6) If using RRG/Iceman repo, input "-p \<port\> -f" in the "Start arguments" editbox.
|
|
|
|
|
|
***
|
|
**On Linux**
|
|
***
|
|
(1) Build the GUI by following the instructions on [README](../../../README.md)
|
|
(2) Config the GUI with the same steps of "On Windows"->"Use the GUI with your own client"
|
|
(3) You might need to change "\<port\>" to "/dev/\<port\>" in "Settings"->"Start arguments" editbox
|
|
|
|
|
|
(4) If you are using Raspbian(Raspberry OS), you might need to check "Keep the client active even the PM3 hardware is disconnected." in the "Steeings" panel
|
|
 |