vlmcsd-1106-2016-12-06-Hotbird64

pull/5/head svn1106
Wind4 8 years ago
parent 9bd3e9c470
commit af593fc11b

@ -306,9 +306,11 @@
<ClInclude Include="..\..\src\output.h" /> <ClInclude Include="..\..\src\output.h" />
<ClInclude Include="..\..\src\rpc.h" /> <ClInclude Include="..\..\src\rpc.h" />
<ClInclude Include="..\..\src\shared_globals.h" /> <ClInclude Include="..\..\src\shared_globals.h" />
<ClInclude Include="..\..\src\tap-windows.h" />
<ClInclude Include="..\..\src\types.h" /> <ClInclude Include="..\..\src\types.h" />
<ClInclude Include="..\..\src\vlmcsd.h" /> <ClInclude Include="..\..\src\vlmcsd.h" />
<ClInclude Include="..\..\src\wingetopt.h" /> <ClInclude Include="..\..\src\wingetopt.h" />
<ClInclude Include="..\..\src\wintap.h" />
</ItemGroup> </ItemGroup>
<ItemGroup> <ItemGroup>
<ClCompile Include="..\..\src\crypto.c" /> <ClCompile Include="..\..\src\crypto.c" />
@ -324,6 +326,7 @@
<ClCompile Include="..\..\src\shared_globals.c" /> <ClCompile Include="..\..\src\shared_globals.c" />
<ClCompile Include="..\..\src\vlmcsd.c" /> <ClCompile Include="..\..\src\vlmcsd.c" />
<ClCompile Include="..\..\src\wingetopt.c" /> <ClCompile Include="..\..\src\wingetopt.c" />
<ClCompile Include="..\..\src\wintap.c" />
</ItemGroup> </ItemGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
<ImportGroup Label="ExtensionTargets"> <ImportGroup Label="ExtensionTargets">

@ -63,6 +63,12 @@
<ClInclude Include="..\..\src\kmsdata.h"> <ClInclude Include="..\..\src\kmsdata.h">
<Filter>Header Files</Filter> <Filter>Header Files</Filter>
</ClInclude> </ClInclude>
<ClInclude Include="..\..\src\tap-windows.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="..\..\src\wintap.h">
<Filter>Header Files</Filter>
</ClInclude>
</ItemGroup> </ItemGroup>
<ItemGroup> <ItemGroup>
<ClCompile Include="..\..\src\crypto.c"> <ClCompile Include="..\..\src\crypto.c">
@ -104,5 +110,8 @@
<ClCompile Include="..\..\src\kmsdata.c"> <ClCompile Include="..\..\src\kmsdata.c">
<Filter>Source Files</Filter> <Filter>Source Files</Filter>
</ClCompile> </ClCompile>
<ClCompile Include="..\..\src\wintap.c">
<Filter>Source Files</Filter>
</ClCompile>
</ItemGroup> </ItemGroup>
</Project> </Project>

@ -292,6 +292,7 @@
<ClCompile Include="..\..\src\vlmcsd.c" /> <ClCompile Include="..\..\src\vlmcsd.c" />
<ClCompile Include="..\..\src\vlmcsdmulti.c" /> <ClCompile Include="..\..\src\vlmcsdmulti.c" />
<ClCompile Include="..\..\src\wingetopt.c" /> <ClCompile Include="..\..\src\wingetopt.c" />
<ClCompile Include="..\..\src\wintap.c" />
</ItemGroup> </ItemGroup>
<ItemGroup> <ItemGroup>
<ClInclude Include="..\..\src\config.h" /> <ClInclude Include="..\..\src\config.h" />
@ -307,10 +308,12 @@
<ClInclude Include="..\..\src\output.h" /> <ClInclude Include="..\..\src\output.h" />
<ClInclude Include="..\..\src\rpc.h" /> <ClInclude Include="..\..\src\rpc.h" />
<ClInclude Include="..\..\src\shared_globals.h" /> <ClInclude Include="..\..\src\shared_globals.h" />
<ClInclude Include="..\..\src\tap-windows.h" />
<ClInclude Include="..\..\src\types.h" /> <ClInclude Include="..\..\src\types.h" />
<ClInclude Include="..\..\src\vlmcs.h" /> <ClInclude Include="..\..\src\vlmcs.h" />
<ClInclude Include="..\..\src\vlmcsd.h" /> <ClInclude Include="..\..\src\vlmcsd.h" />
<ClInclude Include="..\..\src\wingetopt.h" /> <ClInclude Include="..\..\src\wingetopt.h" />
<ClInclude Include="..\..\src\wintap.h" />
</ItemGroup> </ItemGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
<ImportGroup Label="ExtensionTargets"> <ImportGroup Label="ExtensionTargets">

@ -63,6 +63,9 @@
<ClCompile Include="..\..\src\kmsdata-full.c"> <ClCompile Include="..\..\src\kmsdata-full.c">
<Filter>Source Files</Filter> <Filter>Source Files</Filter>
</ClCompile> </ClCompile>
<ClCompile Include="..\..\src\wintap.c">
<Filter>Source Files</Filter>
</ClCompile>
</ItemGroup> </ItemGroup>
<ItemGroup> <ItemGroup>
<ClInclude Include="..\..\src\config.h"> <ClInclude Include="..\..\src\config.h">
@ -116,5 +119,11 @@
<ClInclude Include="..\..\src\kmsdata.h"> <ClInclude Include="..\..\src\kmsdata.h">
<Filter>Header Files</Filter> <Filter>Header Files</Filter>
</ClInclude> </ClInclude>
<ClInclude Include="..\..\src\tap-windows.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="..\..\src\wintap.h">
<Filter>Header Files</Filter>
</ClInclude>
</ItemGroup> </ItemGroup>
</Project> </Project>

@ -23,6 +23,12 @@
# Set ePID/HwId for Office 2016 (including Visio and Project) explicitly # Set ePID/HwId for Office 2016 (including Visio and Project) explicitly
;Office2016 = 06401-00206-437-444444-03-1033-9600.0000-3622014 / 01 02 03 04 05 06 07 08 ;Office2016 = 06401-00206-437-444444-03-1033-9600.0000-3622014 / 01 02 03 04 05 06 07 08
# Use a compatible VPN device to create a hidden local IPv4 address
# Command line: -O
# VPN = <VPN adapter name>[=<IPv4 address>][/<CIDR mask>][:<DHCP lease duration>]
# Use VPN adapter "KMS Mirror" give it IP address 192.168.123.100 with a lease duration of one day and make entire 192.168.128.x a hidden local IPv4 address.
;VPN = KMS Mirror=192.168.123.100/24:1d
# Use custom TCP port # Use custom TCP port
# Command line: -P # Command line: -P
# ***The Port directive only works if vlmcsd was compiled to use MS RPC or simple sockets # ***The Port directive only works if vlmcsd was compiled to use MS RPC or simple sockets

Binary file not shown.

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>

Binary file not shown.

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>

Binary file not shown.

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>

Binary file not shown.

@ -1,5 +1,5 @@
.mso www.tmac .mso www.tmac
.TH VLMCSD 8 "November 2016" "Hotbird64" "KMS Activation Manual" .TH VLMCSD 8 "December 2016" "Hotbird64" "KMS Activation Manual"
.LO 8 .LO 8
.SH NAME .SH NAME
@ -76,10 +76,23 @@ in the 32-bit ABI of the 64-bit kernel. If you have a 64-bit FreeBSD kernel, you
If vlmcsd was started by an internet superserver or was compiled to use Microsoft RPC (Windows only) or simple sockets, \fB-o1\fR and \fB-o3\fR are not available by design. If vlmcsd was started by an internet superserver or was compiled to use Microsoft RPC (Windows only) or simple sockets, \fB-o1\fR and \fB-o3\fR are not available by design.
.RE .RE
.IP "\fB-P\fR \fIport" .IP "\fB-P\fR \fIport\fR"
Use TCP \fIport\fR for all subsequent \fB-L\fR statements that do not include an optional port. If you use \fB-P\fR and \fB-L\fR, \fB-P\fR must be specified before \fB-L\fR. Use TCP \fIport\fR for all subsequent \fB-L\fR statements that do not include an optional port. If you use \fB-P\fR and \fB-L\fR, \fB-P\fR must be specified before \fB-L\fR.
.IP "\fB-F0\fR and \fB-F1\fR .IP "\fB-O\fR \fIvpn-adapter-name\fR[=\fIipv4-address\fR][/\fIcidr-mask\fR][:\fIdhcp-lease-duration\fR]"
Enables a compatible VPN adapter to create additional local IPv4 addresses (like 127.0.0.1) that appear as remote IPv4 addresses to the system. This allows product activation using a local instance of vlmcsd. This feature is only available in Windows and Cygwin builds of vlmcsd since it is not of any use on other operating systems. Compatible VPN adapters are Tap-windows version 8.2 or higher (from OpenVPN) and the TeamViewer VPN adapter. There are two special \fIvpn-adapter-name\fRs. A single period (.) instructs vlmcsd to use the first available compatible VPN adapter. A single dash (\-) disables the use of a VPN adapter if one has been configured in \fBvlmcsd.ini\fR(5). The \fIvpn-adapter-name\fR is \fBnot\fR case-sensitive. If the \fIvpn-adapter-name\fR contains spaces (e.g. Ethernet 3), you must enclose it in quotes.
The default \fIipv4-address\fR is 10.10.10.9 and the default \fIcidr-mask\fR is 30. If you are using the default values, your VPN adapter uses an IPv4 address of 10.10.10.9 and you can set your activation client to use the easy to remember address 10.10.10.10 (e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs /sethst:10.10.10.10).
The \fIdhcp-lease-duration\fR is a number optionally followed by s, m, h, d or w to indicate seconds, minutes, hours, days or weeks. The default \fIdhcp-lease-duration\fR is 1d (one day). It is normally not required to change this value.
It is advised not to manually configure your OpenVPN TAP or TeamViewer VPN adapter in "Network Connections". If you set the IPv4 configuration manually anyway, the IPv4 address and the subnet mask must match the \fB-O\fR parameter. It is safe leave the IPv4 configuration to automatic (DHCP). vlmcsd will wait up to four seconds for the DHCP configuration to complete before binding to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter at a time. If you use the TeamViewer VPN adapter for example, you will not be able to use the VPN feature of TeamViewer as long as vlmcsd is running. The same applies to OpenVPN TAP adapters that are in use by other programs (for example OpenVPN, QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid conflicts is to install Tap-Windows from OpenVPN, cd to C:\\Program Files\\TAP-Windows\\bin and run addtap.bat to install an additional TAP adapter. Go to "Network Connections" and rename the new adapter to "vlmcsd" and specify \fB-O vlmcsd\fR to use it.
Example: \fB-O "Ethernet 7"=192.168.123.1/24\fR (uses VPN adapter Ethernet 7 with IPv4 address 192.168.123.1 and have 192.168.123.2 to 192.168.123.254 as additional local (but apparently remote) IPv4 addresses.
.IP "\fB-F0\fR and \fB-F1\fR"
Allow (\fB-F1\fR) or disallow (\fB-F0\fR) binding to IP addresses that are currently not configured on your system. The default is \fB-F0\fR. \fB-F1\fR allows you to bind to an IP address that may be configured after you started \fBvlmcsd\fR. \fBvlmcsd\fR will listen on that address as soon as it becomes available. This feature is only available under Linux (IPv4 and IPv6) and FreeBSD (IPv4 only). FreeBSD allows this feature only for the root user (more correctly: processes that have the PRIV_NETINET_BINDANY privilege). Linux does not require a capability for this. Allow (\fB-F1\fR) or disallow (\fB-F0\fR) binding to IP addresses that are currently not configured on your system. The default is \fB-F0\fR. \fB-F1\fR allows you to bind to an IP address that may be configured after you started \fBvlmcsd\fR. \fBvlmcsd\fR will listen on that address as soon as it becomes available. This feature is only available under Linux (IPv4 and IPv6) and FreeBSD (IPv4 only). FreeBSD allows this feature only for the root user (more correctly: processes that have the PRIV_NETINET_BINDANY privilege). Linux does not require a capability for this.
.IP "\fB-t\fR \fIseconds\fR" .IP "\fB-t\fR \fIseconds\fR"

@ -172,6 +172,58 @@ OPTIONS
ified before -L. ified before -L.
-O vpn-adapter-name[=ipv4-address][/cidr-mask][:dhcp-lease-duration]
Enables a compatible VPN adapter to create additional local IPv4
addresses (like 127.0.0.1) that appear as remote IPv4 addresses
to the system. This allows product activation using a local
instance of vlmcsd. This feature is only available in Windows
and Cygwin builds of vlmcsd since it is not of any use on other
operating systems. Compatible VPN adapters are Tap-windows ver
sion 8.2 or higher (from OpenVPN) and the TeamViewer VPN
adapter. There are two special vpn-adapter-names. A single
period (.) instructs vlmcsd to use the first available compati
ble VPN adapter. A single dash (-) disables the use of a VPN
adapter if one has been configured in vlmcsd.ini(5). The vpn-
adapter-name is not case-sensitive. If the vpn-adapter-name con
tains spaces (e.g. Ethernet 3), you must enclose it in quotes.
The default ipv4-address is 10.10.10.9 and the default cidr-mask
is 30. If you are using the default values, your VPN adapter
uses an IPv4 address of 10.10.10.9 and you can set your activa
tion client to use the easy to remember address 10.10.10.10
(e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs
/sethst:10.10.10.10).
The dhcp-lease-duration is a number optionally followed by s, m,
h, d or w to indicate seconds, minutes, hours, days or weeks.
The default dhcp-lease-duration is 1d (one day). It is normally
not required to change this value.
It is advised not to manually configure your OpenVPN TAP or
TeamViewer VPN adapter in "Network Connections". If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the -O parameter. It is safe leave the
IPv4 configuration to automatic (DHCP). vlmcsd will wait up to
four seconds for the DHCP configuration to complete before bind
ing to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter
at a time. If you use the TeamViewer VPN adapter for example,
you will not be able to use the VPN feature of TeamViewer as
long as vlmcsd is running. The same applies to OpenVPN TAP
adapters that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid con
flicts is to install Tap-Windows from OpenVPN, cd to C:\Program
Files\TAP-Windows\bin and run addtap.bat to install an addi
tional TAP adapter. Go to "Network Connections" and rename the
new adapter to "vlmcsd" and specify -O vlmcsd to use it.
Example: -O "Ethernet 7"=192.168.123.1/24 (uses VPN adapter Eth
ernet 7 with IPv4 address 192.168.123.1 and have 192.168.123.2
to 192.168.123.254 as additional local (but apparently remote)
IPv4 addresses.
-F0 and -F1 -F0 and -F1
Allow (-F1) or disallow (-F0) binding to IP addresses that are Allow (-F1) or disallow (-F0) binding to IP addresses that are
currently not configured on your system. The default is -F0. -F1 currently not configured on your system. The default is -F0. -F1
@ -705,4 +757,4 @@ SEE ALSO
Hotbird64 November 2016 VLMCSD(8) Hotbird64 December 2016 VLMCSD(8)

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>
@ -273,6 +273,70 @@ subsequent <b>-L</b> statements that do not include an
optional port. If you use <b>-P</b> and <b>-L</b>, <b>-P</b> optional port. If you use <b>-P</b> and <b>-L</b>, <b>-P</b>
must be specified before <b>-L</b>.</p> must be specified before <b>-L</b>.</p>
<p style="margin-left:11%;"><b>-O</b>
<i>vpn-adapter-name</i>[=<i>ipv4-address</i>][/<i>cidr-mask</i>][:<i>dhcp-lease-duration</i>]</p>
<p style="margin-left:22%;">Enables a compatible VPN
adapter to create additional local IPv4 addresses (like
127.0.0.1) that appear as remote IPv4 addresses to the
system. This allows product activation using a local
instance of vlmcsd. This feature is only available in
Windows and Cygwin builds of vlmcsd since it is not of any
use on other operating systems. Compatible VPN adapters are
Tap-windows version 8.2 or higher (from OpenVPN) and the
TeamViewer VPN adapter. There are two special
<i>vpn-adapter-name</i>s. A single period (.) instructs
vlmcsd to use the first available compatible VPN adapter. A
single dash (-) disables the use of a VPN adapter if one has
been configured in <b>vlmcsd.ini</b>(5). The
<i>vpn-adapter-name</i> is <b>not</b> case-sensitive. If the
<i>vpn-adapter-name</i> contains spaces (e.g. Ethernet 3),
you must enclose it in quotes.</p>
<p style="margin-left:22%; margin-top: 1em">The default
<i>ipv4-address</i> is 10.10.10.9 and the default
<i>cidr-mask</i> is 30. If you are using the default values,
your VPN adapter uses an IPv4 address of 10.10.10.9 and you
can set your activation client to use the easy to remember
address 10.10.10.10 (e.g. slmgr /skms 10.10.10.10 or cscript
ospp.vbs /sethst:10.10.10.10).</p>
<p style="margin-left:22%; margin-top: 1em">The
<i>dhcp-lease-duration</i> is a number optionally followed
by s, m, h, d or w to indicate seconds, minutes, hours, days
or weeks. The default <i>dhcp-lease-duration</i> is 1d (one
day). It is normally not required to change this value.</p>
<p style="margin-left:22%; margin-top: 1em">It is advised
not to manually configure your OpenVPN TAP or TeamViewer VPN
adapter in &quot;Network Connections&quot;. If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the <b>-O</b> parameter. It is safe
leave the IPv4 configuration to automatic (DHCP). vlmcsd
will wait up to four seconds for the DHCP configuration to
complete before binding to and listenin on any
interfaces.</p>
<p style="margin-left:22%; margin-top: 1em">You should be
aware that only one program can use a VPN adapter at a time.
If you use the TeamViewer VPN adapter for example, you will
not be able to use the VPN feature of TeamViewer as long as
vlmcsd is running. The same applies to OpenVPN TAP adapters
that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid
conflicts is to install Tap-Windows from OpenVPN, cd to
C:\Program Files\TAP-Windows\bin and run addtap.bat to
install an additional TAP adapter. Go to &quot;Network
Connections&quot; and rename the new adapter to
&quot;vlmcsd&quot; and specify <b>-O vlmcsd</b> to use
it.</p>
<p style="margin-left:22%; margin-top: 1em">Example: <b>-O
&quot;Ethernet 7&quot;=192.168.123.1/24</b> (uses VPN
adapter Ethernet 7 with IPv4 address 192.168.123.1 and have
192.168.123.2 to 192.168.123.254 as additional local (but
apparently remote) IPv4 addresses.</p>
<p style="margin-left:11%;"><b>-F0</b> and <b>-F1</b></p> <p style="margin-left:11%;"><b>-F0</b> and <b>-F1</b></p>
<p style="margin-left:22%;">Allow (<b>-F1</b>) or disallow <p style="margin-left:22%;">Allow (<b>-F1</b>) or disallow

Binary file not shown.

@ -172,6 +172,58 @@ OPTIONS
ified before -L. ified before -L.
-O vpn-adapter-name[=ipv4-address][/cidr-mask][:dhcp-lease-duration]
Enables a compatible VPN adapter to create additional local IPv4
addresses (like 127.0.0.1) that appear as remote IPv4 addresses
to the system. This allows product activation using a local
instance of vlmcsd. This feature is only available in Windows
and Cygwin builds of vlmcsd since it is not of any use on other
operating systems. Compatible VPN adapters are Tap-windows ver
sion 8.2 or higher (from OpenVPN) and the TeamViewer VPN
adapter. There are two special vpn-adapter-names. A single
period (.) instructs vlmcsd to use the first available compati
ble VPN adapter. A single dash (-) disables the use of a VPN
adapter if one has been configured in vlmcsd.ini(5). The vpn-
adapter-name is not case-sensitive. If the vpn-adapter-name con
tains spaces (e.g. Ethernet 3), you must enclose it in quotes.
The default ipv4-address is 10.10.10.9 and the default cidr-mask
is 30. If you are using the default values, your VPN adapter
uses an IPv4 address of 10.10.10.9 and you can set your activa
tion client to use the easy to remember address 10.10.10.10
(e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs
/sethst:10.10.10.10).
The dhcp-lease-duration is a number optionally followed by s, m,
h, d or w to indicate seconds, minutes, hours, days or weeks.
The default dhcp-lease-duration is 1d (one day). It is normally
not required to change this value.
It is advised not to manually configure your OpenVPN TAP or
TeamViewer VPN adapter in "Network Connections". If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the -O parameter. It is safe leave the
IPv4 configuration to automatic (DHCP). vlmcsd will wait up to
four seconds for the DHCP configuration to complete before bind
ing to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter
at a time. If you use the TeamViewer VPN adapter for example,
you will not be able to use the VPN feature of TeamViewer as
long as vlmcsd is running. The same applies to OpenVPN TAP
adapters that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid con
flicts is to install Tap-Windows from OpenVPN, cd to C:\Program
Files\TAP-Windows\bin and run addtap.bat to install an addi
tional TAP adapter. Go to "Network Connections" and rename the
new adapter to "vlmcsd" and specify -O vlmcsd to use it.
Example: -O "Ethernet 7"=192.168.123.1/24 (uses VPN adapter Eth
ernet 7 with IPv4 address 192.168.123.1 and have 192.168.123.2
to 192.168.123.254 as additional local (but apparently remote)
IPv4 addresses.
-F0 and -F1 -F0 and -F1
Allow (-F1) or disallow (-F0) binding to IP addresses that are Allow (-F1) or disallow (-F0) binding to IP addresses that are
currently not configured on your system. The default is -F0. -F1 currently not configured on your system. The default is -F0. -F1
@ -705,4 +757,4 @@ SEE ALSO
Hotbird64 November 2016 VLMCSD(8) Hotbird64 December 2016 VLMCSD(8)

@ -1,4 +1,4 @@
.TH VLMCSD.INI 5 "November 2016" "Hotbird64" "KMS Activation Manual" .TH VLMCSD.INI 5 "December 2016" "Hotbird64" "KMS Activation Manual"
.LO 8 .LO 8
.SH NAME .SH NAME
@ -66,6 +66,19 @@ Set the level of protection against KMS activations from public IP addresses.
For details on public IP protection levels see \fBvlmcsd\fR(8) command line option \fB-o\fR. For details on public IP protection levels see \fBvlmcsd\fR(8) command line option \fB-o\fR.
.IP "\fBVPN\fR"
Has to be in the form \fIvpn-adapter-name\fR[=\fIipv4-address\fR][/\fIcidr-mask\fR][:\fIdhcp-lease-duration\fR].
Enables a compatible VPN adapter to create additional local IPv4 addresses (like 127.0.0.1) that appear as remote IPv4 addresses to the system. This allows product activation using a local instance of vlmcsd. This feature is only available in Windows and Cygwin builds of vlmcsd since it is not of any use on other operating systems. Compatible VPN adapters are Tap-windows version 8.2 or higher (from OpenVPN) and the TeamViewer VPN adapter. There is a special \fIvpn-adapter-name\fR. A single period (.) instructs vlmcsd to use the first available compatible VPN adapter. The \fIvpn-adapter-name\fR is \fBnot\fR case-sensitive. If the \fIvpn-adapter-name\fR contains spaces (e.g. Ethernet 3), do \fBnot\fR enclose it in quotes.
The default \fIipv4-address\fR is 10.10.10.9 and the default \fIcidr-mask\fR is 30. If you are using the default values, your VPN adapter uses an IPv4 address of 10.10.10.9 and you can set your activation client to use the easy to remember address 10.10.10.10 (e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs /sethst:10.10.10.10).
The \fIdhcp-lease-duration\fR is a number optionally followed by s, m, h, d or w to indicate seconds, minutes, hours, days or weeks. The default \fIdhcp-lease-duration\fR is 1d (one day). It is normally not required to change this value.
It is advised not to manually configure your OpenVPN TAP or TeamViewer VPN adapter in "Network Connections". If you set the IPv4 configuration manually anyway, the IPv4 address and the subnet mask must match the \fBVPN=\fR directive. It is safe leave the IPv4 configuration to automatic (DHCP). vlmcsd will wait up to four seconds for the DHCP configuration to complete before binding to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter at a time. If you use the TeamViewer VPN adapter for example, you will not be able to use the VPN feature of TeamViewer as long as vlmcsd is running. The same applies to OpenVPN TAP adapters that are in use by other programs (for example OpenVPN, QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid conflicts is to install Tap-Windows from OpenVPN, cd to C:\\Program Files\\TAP-Windows\\bin and run addtap.bat to install an additional TAP adapter. Go to "Network Connections" and rename the new adapter to "vlmcsd" and specify \fBVPN=vlmcsd\fR to use it.
.IP "\fBUseNDR64\fR" .IP "\fBUseNDR64\fR"
Can be TRUE or FALSE. Specifies whether you want to use the NDR64 transfer syntax. See options \fB-n0\fR and \fB-n1\fR in \fBvlmcsd\fR(8). The default is TRUE. Can be TRUE or FALSE. Specifies whether you want to use the NDR64 transfer syntax. See options \fB-n0\fR and \fB-n1\fR in \fBvlmcsd\fR(8). The default is TRUE.

@ -123,6 +123,54 @@ KEYWORDS
line option -o. line option -o.
VPN Has to be in the form vpn-adapter-name[=ipv4-address][/cidr-
mask][:dhcp-lease-duration].
Enables a compatible VPN adapter to create additional local IPv4
addresses (like 127.0.0.1) that appear as remote IPv4 addresses
to the system. This allows product activation using a local
instance of vlmcsd. This feature is only available in Windows
and Cygwin builds of vlmcsd since it is not of any use on other
operating systems. Compatible VPN adapters are Tap-windows ver
sion 8.2 or higher (from OpenVPN) and the TeamViewer VPN
adapter. There is a special vpn-adapter-name. A single period
(.) instructs vlmcsd to use the first available compatible VPN
adapter. The vpn-adapter-name is not case-sensitive. If the vpn-
adapter-name contains spaces (e.g. Ethernet 3), do not enclose
it in quotes.
The default ipv4-address is 10.10.10.9 and the default cidr-mask
is 30. If you are using the default values, your VPN adapter
uses an IPv4 address of 10.10.10.9 and you can set your activa
tion client to use the easy to remember address 10.10.10.10
(e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs
/sethst:10.10.10.10).
The dhcp-lease-duration is a number optionally followed by s, m,
h, d or w to indicate seconds, minutes, hours, days or weeks.
The default dhcp-lease-duration is 1d (one day). It is normally
not required to change this value.
It is advised not to manually configure your OpenVPN TAP or
TeamViewer VPN adapter in "Network Connections". If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the VPN= directive. It is safe leave the
IPv4 configuration to automatic (DHCP). vlmcsd will wait up to
four seconds for the DHCP configuration to complete before bind
ing to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter
at a time. If you use the TeamViewer VPN adapter for example,
you will not be able to use the VPN feature of TeamViewer as
long as vlmcsd is running. The same applies to OpenVPN TAP
adapters that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid con
flicts is to install Tap-Windows from OpenVPN, cd to C:\Program
Files\TAP-Windows\bin and run addtap.bat to install an addi
tional TAP adapter. Go to "Network Connections" and rename the
new adapter to "vlmcsd" and specify VPN=vlmcsd to use it.
UseNDR64 UseNDR64
Can be TRUE or FALSE. Specifies whether you want to use the Can be TRUE or FALSE. Specifies whether you want to use the
NDR64 transfer syntax. See options -n0 and -n1 in vlmcsd(8). The NDR64 transfer syntax. See options -n0 and -n1 in vlmcsd(8). The
@ -400,4 +448,4 @@ SEE ALSO
Hotbird64 November 2016 VLMCSD.INI(5) Hotbird64 December 2016 VLMCSD.INI(5)

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>
@ -227,6 +227,75 @@ without activating <br>
public IP protection levels see <b>vlmcsd</b>(8) command public IP protection levels see <b>vlmcsd</b>(8) command
line option <b>-o</b>.</p> line option <b>-o</b>.</p>
<table width="100%" border="0" rules="none" frame="void"
cellspacing="0" cellpadding="0">
<tr valign="top" align="left">
<td width="11%"></td>
<td width="4%">
<p><b>VPN</b></p></td>
<td width="7%"></td>
<td width="78%">
<p>Has to be in the form
<i>vpn-adapter-name</i>[=<i>ipv4-address</i>][/<i>cidr-mask</i>][:<i>dhcp-lease-duration</i>].</p> </td></tr>
</table>
<p style="margin-left:22%; margin-top: 1em">Enables a
compatible VPN adapter to create additional local IPv4
addresses (like 127.0.0.1) that appear as remote IPv4
addresses to the system. This allows product activation
using a local instance of vlmcsd. This feature is only
available in Windows and Cygwin builds of vlmcsd since it is
not of any use on other operating systems. Compatible VPN
adapters are Tap-windows version 8.2 or higher (from
OpenVPN) and the TeamViewer VPN adapter. There is a special
<i>vpn-adapter-name</i>. A single period (.) instructs
vlmcsd to use the first available compatible VPN adapter.
The <i>vpn-adapter-name</i> is <b>not</b> case-sensitive. If
the <i>vpn-adapter-name</i> contains spaces (e.g. Ethernet
3), do <b>not</b> enclose it in quotes.</p>
<p style="margin-left:22%; margin-top: 1em">The default
<i>ipv4-address</i> is 10.10.10.9 and the default
<i>cidr-mask</i> is 30. If you are using the default values,
your VPN adapter uses an IPv4 address of 10.10.10.9 and you
can set your activation client to use the easy to remember
address 10.10.10.10 (e.g. slmgr /skms 10.10.10.10 or cscript
ospp.vbs /sethst:10.10.10.10).</p>
<p style="margin-left:22%; margin-top: 1em">The
<i>dhcp-lease-duration</i> is a number optionally followed
by s, m, h, d or w to indicate seconds, minutes, hours, days
or weeks. The default <i>dhcp-lease-duration</i> is 1d (one
day). It is normally not required to change this value.</p>
<p style="margin-left:22%; margin-top: 1em">It is advised
not to manually configure your OpenVPN TAP or TeamViewer VPN
adapter in &quot;Network Connections&quot;. If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the <b>VPN=</b> directive. It is safe
leave the IPv4 configuration to automatic (DHCP). vlmcsd
will wait up to four seconds for the DHCP configuration to
complete before binding to and listenin on any
interfaces.</p>
<p style="margin-left:22%; margin-top: 1em">You should be
aware that only one program can use a VPN adapter at a time.
If you use the TeamViewer VPN adapter for example, you will
not be able to use the VPN feature of TeamViewer as long as
vlmcsd is running. The same applies to OpenVPN TAP adapters
that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid
conflicts is to install Tap-Windows from OpenVPN, cd to
C:\Program Files\TAP-Windows\bin and run addtap.bat to
install an additional TAP adapter. Go to &quot;Network
Connections&quot; and rename the new adapter to
&quot;vlmcsd&quot; and specify <b>VPN=vlmcsd</b> to use
it.</p>
<p style="margin-left:11%;"><b>UseNDR64</b></p> <p style="margin-left:11%;"><b>UseNDR64</b></p>
<p style="margin-left:22%;">Can be TRUE or FALSE. Specifies <p style="margin-left:22%;">Can be TRUE or FALSE. Specifies

Binary file not shown.

@ -123,6 +123,54 @@ KEYWORDS
line option -o. line option -o.
VPN Has to be in the form vpn-adapter-name[=ipv4-address][/cidr-
mask][:dhcp-lease-duration].
Enables a compatible VPN adapter to create additional local IPv4
addresses (like 127.0.0.1) that appear as remote IPv4 addresses
to the system. This allows product activation using a local
instance of vlmcsd. This feature is only available in Windows
and Cygwin builds of vlmcsd since it is not of any use on other
operating systems. Compatible VPN adapters are Tap-windows ver
sion 8.2 or higher (from OpenVPN) and the TeamViewer VPN
adapter. There is a special vpn-adapter-name. A single period
(.) instructs vlmcsd to use the first available compatible VPN
adapter. The vpn-adapter-name is not case-sensitive. If the vpn-
adapter-name contains spaces (e.g. Ethernet 3), do not enclose
it in quotes.
The default ipv4-address is 10.10.10.9 and the default cidr-mask
is 30. If you are using the default values, your VPN adapter
uses an IPv4 address of 10.10.10.9 and you can set your activa
tion client to use the easy to remember address 10.10.10.10
(e.g. slmgr /skms 10.10.10.10 or cscript ospp.vbs
/sethst:10.10.10.10).
The dhcp-lease-duration is a number optionally followed by s, m,
h, d or w to indicate seconds, minutes, hours, days or weeks.
The default dhcp-lease-duration is 1d (one day). It is normally
not required to change this value.
It is advised not to manually configure your OpenVPN TAP or
TeamViewer VPN adapter in "Network Connections". If you set the
IPv4 configuration manually anyway, the IPv4 address and the
subnet mask must match the VPN= directive. It is safe leave the
IPv4 configuration to automatic (DHCP). vlmcsd will wait up to
four seconds for the DHCP configuration to complete before bind
ing to and listenin on any interfaces.
You should be aware that only one program can use a VPN adapter
at a time. If you use the TeamViewer VPN adapter for example,
you will not be able to use the VPN feature of TeamViewer as
long as vlmcsd is running. The same applies to OpenVPN TAP
adapters that are in use by other programs (for example OpenVPN,
QEMU, Ratiborus VM, aiccu, etc.). The best way to avoid con
flicts is to install Tap-Windows from OpenVPN, cd to C:\Program
Files\TAP-Windows\bin and run addtap.bat to install an addi
tional TAP adapter. Go to "Network Connections" and rename the
new adapter to "vlmcsd" and specify VPN=vlmcsd to use it.
UseNDR64 UseNDR64
Can be TRUE or FALSE. Specifies whether you want to use the Can be TRUE or FALSE. Specifies whether you want to use the
NDR64 transfer syntax. See options -n0 and -n1 in vlmcsd(8). The NDR64 transfer syntax. See options -n0 and -n1 in vlmcsd(8). The
@ -400,4 +448,4 @@ SEE ALSO
Hotbird64 November 2016 VLMCSD.INI(5) Hotbird64 December 2016 VLMCSD.INI(5)

@ -1,5 +1,5 @@
<!-- Creator : groff version 1.22.3 --> <!-- Creator : groff version 1.22.3 -->
<!-- CreationDate: Mon Nov 28 01:28:23 2016 --> <!-- CreationDate: Mon Dec 5 18:18:46 2016 -->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"> "http://www.w3.org/TR/html4/loose.dtd">
<html> <html>

Binary file not shown.

@ -192,6 +192,12 @@ ifneq ($(NOLIBS),1)
endif endif
endif endif
ifneq ($(NOLIBS),1)
ifeq ($(CYGWIN),1)
BASELDFLAGS += -liphlpapi
endif
endif
ifneq ($(NO_DNS),1) ifneq ($(NO_DNS),1)
ifneq ($(ANDROID),1) ifneq ($(ANDROID),1)
ifneq ($(NOLRESOLV),1) ifneq ($(NOLRESOLV),1)
@ -441,9 +447,9 @@ endif
endif endif
ifeq "$(WIN)" "1" ifeq "$(WIN)" "1"
VLMCSD_SRCS += ntservice.c VLMCSD_SRCS += ntservice.c wintap.c
MULTI_SRCS += ntservice.c MULTI_SRCS += ntservice.c wintap.c
../build/MULTI_OBJS += ntservice.o MULTI_OBJS += ../build/ntservice.o ../build/wintap.o
endif endif
ifeq ($(CRYPTO), openssl_with_aes) ifeq ($(CRYPTO), openssl_with_aes)

@ -230,6 +230,35 @@ int_fast8_t string2UuidLE(const char *const restrict input, GUID *const restrict
} }
__pure DWORD timeSpanString2Seconds(const char *const restrict argument)
{
char *unitId;
long long val = vlmcsd_strtoll(argument, &unitId, 10);
switch (toupper((int)*unitId))
{
case 'W':
val *= 7;
case 'D':
val *= 24;
case 'H':
val *= 60;
case 0:
case 'M':
val *= 60;
case 'S':
break;
default:
return 0;
}
if (*unitId && unitId[1]) return 0;
if (val < 1) val = 1;
return (DWORD)(val & UINT_MAX);
}
#if !IS_LIBRARY #if !IS_LIBRARY
//Checks a command line argument if it is numeric and between min and max. Returns the numeric value or exits on error //Checks a command line argument if it is numeric and between min and max. Returns the numeric value or exits on error
__pure unsigned int getOptionArgumentInt(const char o, const unsigned int min, const unsigned int max) __pure unsigned int getOptionArgumentInt(const char o, const unsigned int min, const unsigned int max)
@ -261,7 +290,7 @@ void optReset(void)
} }
#endif // !IS_LIBRARY #endif // !IS_LIBRARY
#if defined(_WIN32) || defined(USE_MSRPC) #if _WIN32 || __CYGWIN__
// Returns a static message buffer containing text for a given Win32 error. Not thread safe (same as strerror) // Returns a static message buffer containing text for a given Win32 error. Not thread safe (same as strerror)
char* win_strerror(const int message) char* win_strerror(const int message)
@ -273,7 +302,7 @@ char* win_strerror(const int message)
return buffer; return buffer;
} }
#endif // defined(_WIN32) || defined(USE_MSRPC) #endif // _WIN32 || __CYGWIN__
/* /*
@ -493,11 +522,11 @@ void getExeName()
#ifdef _WIN32 #ifdef _WIN32
static void getDefaultDataFile() static void getDefaultDataFile()
{ {
char fileName[512]; char fileName[MAX_PATH];
getExeName(); getExeName();
strcpy(fileName, fn_exe); strncpy(fileName, fn_exe, MAX_PATH);
PathRemoveFileSpec(fileName); PathRemoveFileSpec(fileName);
strncat(fileName, "\\vlmcsd.kmd", 512); strncat(fileName, "\\vlmcsd.kmd", MAX_PATH);
fn_data = vlmcsd_strdup(fileName); fn_data = vlmcsd_strdup(fileName);
} }
#else // !_WIN32 #else // !_WIN32

@ -20,6 +20,8 @@
BOOL stringToInt(const char *const szValue, const unsigned int min, const unsigned int max, unsigned int *const value); BOOL stringToInt(const char *const szValue, const unsigned int min, const unsigned int max, unsigned int *const value);
unsigned int getOptionArgumentInt(const char o, const unsigned int min, const unsigned int max); unsigned int getOptionArgumentInt(const char o, const unsigned int min, const unsigned int max);
void optReset(void); void optReset(void);
__pure DWORD timeSpanString2Seconds(const char *const restrict argument);
#define timeSpanString2Minutes(x) (timeSpanString2Seconds(x) / 60)
char* win_strerror(const int message); char* win_strerror(const int message);
int ucs2_to_utf8_char (const WCHAR ucs2_le, char *utf8); int ucs2_to_utf8_char (const WCHAR ucs2_le, char *utf8);
size_t utf8_to_ucs2(WCHAR* const ucs2_le, const char* const utf8, const size_t maxucs2, const size_t maxutf8); size_t utf8_to_ucs2(WCHAR* const ucs2_le, const char* const utf8, const size_t maxucs2, const size_t maxutf8);

@ -643,6 +643,10 @@ void printServerFlags()
" SUPPORT_WINE" " SUPPORT_WINE"
# endif // (_WIN32 || __CYGWIN__) && (!defined(USE_MSRPC) || defined(SUPPORT_WINE)) # endif // (_WIN32 || __CYGWIN__) && (!defined(USE_MSRPC) || defined(SUPPORT_WINE))
# if (_WIN32 || __CYGWIN__) && defined(NO_TAP)
" NO_TAP"
# endif // (_WIN32 || __CYGWIN__) && defined(NO_TAP)
# if !HAVE_FREEBIND # if !HAVE_FREEBIND
" NO_FREEBIND" " NO_FREEBIND"
# endif //!HAVE_FREEBIND # endif //!HAVE_FREEBIND

@ -0,0 +1,77 @@
/*
* TAP-Windows -- A kernel driver to provide virtual tap
* device functionality on Windows.
*
* This code was inspired by the CIPE-Win32 driver by Damion K. Wilson.
*
* This source code is Copyright (C) 2002-2014 OpenVPN Technologies, Inc.,
* and is released under the GPL version 2 (see below). This particular file
* (tap-windows.h) is also licensed using the MIT license (see COPYRIGHT.MIT).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program (see the file COPYING included with this
* distribution); if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TAP_WIN_H
#define __TAP_WIN_H
/*
* =============
* TAP IOCTLs
* =============
*/
#define TAP_WIN_CONTROL_CODE(request,method) \
CTL_CODE (FILE_DEVICE_UNKNOWN, request, method, FILE_ANY_ACCESS)
/* Present in 8.1 */
#define TAP_WIN_IOCTL_GET_MAC TAP_WIN_CONTROL_CODE (1, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_GET_VERSION TAP_WIN_CONTROL_CODE (2, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_GET_MTU TAP_WIN_CONTROL_CODE (3, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_GET_INFO TAP_WIN_CONTROL_CODE (4, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_CONFIG_POINT_TO_POINT TAP_WIN_CONTROL_CODE (5, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_SET_MEDIA_STATUS TAP_WIN_CONTROL_CODE (6, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_CONFIG_DHCP_MASQ TAP_WIN_CONTROL_CODE (7, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_GET_LOG_LINE TAP_WIN_CONTROL_CODE (8, METHOD_BUFFERED)
#define TAP_WIN_IOCTL_CONFIG_DHCP_SET_OPT TAP_WIN_CONTROL_CODE (9, METHOD_BUFFERED)
/* Added in 8.2 */
/* obsoletes TAP_WIN_IOCTL_CONFIG_POINT_TO_POINT */
#define TAP_WIN_IOCTL_CONFIG_TUN TAP_WIN_CONTROL_CODE (10, METHOD_BUFFERED)
/*
* =================
* Registry keys
* =================
*/
#define ADAPTER_KEY "SYSTEM\\CurrentControlSet\\Control\\Class\\{4D36E972-E325-11CE-BFC1-08002BE10318}"
#define NETWORK_CONNECTIONS_KEY "SYSTEM\\CurrentControlSet\\Control\\Network\\{4D36E972-E325-11CE-BFC1-08002BE10318}"
/*
* ======================
* Filesystem prefixes
* ======================
*/
#define USERMODEDEVICEDIR "\\\\.\\Global\\"
#define SYSDEVICEDIR "\\Device\\"
#define USERDEVICEDIR "\\DosDevices\\Global\\"
#define TAP_WIN_SUFFIX ".tap"
#endif // __TAP_WIN_H

@ -227,6 +227,10 @@ typedef struct __packed
#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(NO_SOCKETS) #if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(NO_SOCKETS)
#define _NTSERVICE #define _NTSERVICE
#else
#ifndef NO_TAP
#define NO_TAP
#endif
#endif #endif
#if (defined(__CYGWIN__) || defined(_WIN32) || defined(NO_SOCKETS)) && !defined(NO_SIGHUP) #if (defined(__CYGWIN__) || defined(_WIN32) || defined(NO_SOCKETS)) && !defined(NO_SIGHUP)

@ -854,7 +854,7 @@ int SendActivationRequest(const RpcCtx sock, RESPONSE *baseResponse, REQUEST *ba
else else
request = CreateRequestV6(&requestSize, baseRequest); request = CreateRequestV6(&requestSize, baseRequest);
if (!(status = rpcSendRequest(sock, request, requestSize, &response, &responseSize))) if (!((status = rpcSendRequest(sock, request, requestSize, &response, &responseSize))))
{ {
if (LE16(((RESPONSE*)(response))->MajorVer) == 4) if (LE16(((RESPONSE*)(response))->MajorVer) == 4)
{ {

@ -80,7 +80,11 @@
#include "ntservice.h" #include "ntservice.h"
#include "helpers.h" #include "helpers.h"
static const char* const optstring = "N:B:m:t:w:0:3:6:H:A:R:u:g:L:p:i:P:l:r:U:W:C:c:F:o:T:K:E:M:j:SseDdVvqkZ"; #ifndef NO_TAP
#include "wintap.h"
#endif
static const char* const optstring = "N:B:m:t:w:0:3:6:H:A:R:u:g:L:p:i:P:l:r:U:W:C:c:F:O:o:T:K:E:M:j:SseDdVvqkZ";
#if !defined(NO_SOCKETS) && !defined(USE_MSRPC) && !defined(SIMPLE_SOCKETS) #if !defined(NO_SOCKETS) && !defined(USE_MSRPC) && !defined(SIMPLE_SOCKETS)
static uint_fast8_t maxsockets = 0; static uint_fast8_t maxsockets = 0;
@ -105,6 +109,10 @@ static const char *fn_ini = INI_FILE;
static const char *fn_ini = NULL; static const char *fn_ini = NULL;
#endif // !INI_FILE #endif // !INI_FILE
#ifndef NO_TAP
char* tapArgument = NULL;
#endif // NO_TAP
static const char* IniFileErrorMessage = ""; static const char* IniFileErrorMessage = "";
char* IniFileErrorBuffer = NULL; char* IniFileErrorBuffer = NULL;
#define INIFILE_ERROR_BUFFERSIZE 256 #define INIFILE_ERROR_BUFFERSIZE 256
@ -115,6 +123,9 @@ static IniFileParameter_t IniFileParameterList[] =
{ "Office2010", INI_PARAM_OFFICE2010 }, { "Office2010", INI_PARAM_OFFICE2010 },
{ "Office2013", INI_PARAM_OFFICE2013 }, { "Office2013", INI_PARAM_OFFICE2013 },
{ "Office2016", INI_PARAM_OFFICE2016 }, { "Office2016", INI_PARAM_OFFICE2016 },
# ifndef NO_TAP
{ "VPN", INI_PARAM_VPN },
# endif // NO_TAP
# ifndef NO_EXTERNAL_DATA # ifndef NO_EXTERNAL_DATA
{ "KmsData", INI_PARAM_DATA_FILE }, { "KmsData", INI_PARAM_DATA_FILE },
# endif // NO_EXTERNAL_DATA # endif // NO_EXTERNAL_DATA
@ -281,6 +292,9 @@ static __noreturn void usage()
# endif // USE_MSRPC # endif // USE_MSRPC
# endif // !HAVE_GETIFADDR # endif // !HAVE_GETIFADDR
# endif // !defined(NO_PRIVATE_IP_DETECT) # endif // !defined(NO_PRIVATE_IP_DETECT)
# ifndef NO_TAP
" -O <v>[=<a>][/<c>]\tuse VPN adapter <v> with IPv4 address <a> and CIDR <c>\n"
# endif
# ifndef NO_SOCKETS # ifndef NO_SOCKETS
# if !defined(USE_MSRPC) && !defined(SIMPLE_SOCKETS) # if !defined(USE_MSRPC) && !defined(SIMPLE_SOCKETS)
" -L <address>[:<port>]\tlisten on IP address <address> with optional <port>\n" " -L <address>[:<port>]\tlisten on IP address <address> with optional <port>\n"
@ -368,43 +382,8 @@ static __noreturn void usage()
#ifndef NO_CUSTOM_INTERVALS #ifndef NO_CUSTOM_INTERVALS
// Convert time span strings (e.g. "2h", "5w") to minutes
__pure static DWORD timeSpanString2Minutes(const char *const restrict argument)
{
char *unitId;
long long val = vlmcsd_strtoll(argument, &unitId, 10);
switch (toupper((int)*unitId))
{
case 0:
case 'M':
break;
case 'H':
val *= 60;
break;
case 'D':
val *= 60 * 24;
break;
case 'W':
val *= 60 * 24 * 7;
break;
case 'S':
val /= 60;
break;
default:
return 0;
}
if (val < 1) val = 1;
if (val > UINT_MAX) val = UINT_MAX;
return (DWORD)val;
}
#ifndef NO_INI_FILE #ifndef NO_INI_FILE
__pure static BOOL getTimeSpanFromIniFile(DWORD* result, const char *const restrict argument) __pure static BOOL getTimeSpanFromIniFile(DWORD* result, const char *const restrict argument)
{ {
DWORD val = timeSpanString2Minutes(argument); DWORD val = timeSpanString2Minutes(argument);
@ -417,12 +396,13 @@ __pure static BOOL getTimeSpanFromIniFile(DWORD* result, const char *const restr
*result = val; *result = val;
return TRUE; return TRUE;
} }
#endif // NO_INI_FILE #endif // NO_INI_FILE
__pure static DWORD getTimeSpanFromCommandLine(const char *const restrict optarg, const char optchar) __pure static DWORD getTimeSpanFromCommandLine(const char *const restrict optarg, const char optchar)
{ {
long long val = timeSpanString2Minutes(optarg); DWORD val = timeSpanString2Minutes(optarg);
if (!val) if (!val)
{ {
@ -430,7 +410,7 @@ __pure static DWORD getTimeSpanFromCommandLine(const char *const restrict optarg
exit(VLMCSD_EINVAL); exit(VLMCSD_EINVAL);
} }
return (DWORD)val; return val;
} }
#endif // NO_CUSTOM_INTERVALS #endif // NO_CUSTOM_INTERVALS
@ -569,6 +549,14 @@ static BOOL setIniFileParameter(uint_fast8_t id, const char *const iniarg)
setHwIdFromIniFileLine(&s, EPID_INDEX_OFFICE2016); setHwIdFromIniFileLine(&s, EPID_INDEX_OFFICE2016);
break; break;
# ifndef NO_TAP
case INI_PARAM_VPN:
tapArgument = (char*)vlmcsd_strdup(iniarg);
break;
# endif // NO_TAP
# if !defined(NO_USER_SWITCH) && !_WIN32 # if !defined(NO_USER_SWITCH) && !_WIN32
case INI_PARAM_GID: case INI_PARAM_GID:
@ -1078,6 +1066,15 @@ static void parseGeneralArguments() {
break; break;
# endif // !defined(NO_SOCKETS) && !defined(NO_SIGHUP) && !defined(_WIN32) # endif // !defined(NO_SOCKETS) && !defined(NO_SIGHUP) && !defined(_WIN32)
# ifndef NO_TAP
case 'O':
ignoreIniFileParameter(INI_PARAM_VPN);
tapArgument = getCommandLineArg(optarg);
break;
# endif // NO_TAP
# ifndef NO_CL_PIDS # ifndef NO_CL_PIDS
case 'w': case 'w':
@ -1413,16 +1410,16 @@ static void writePidFile()
if (fn_pid && !InetdMode) if (fn_pid && !InetdMode)
{ {
FILE *_f = fopen(fn_pid, "w"); FILE *file = fopen(fn_pid, "w");
if (_f) if (file)
{ {
# if _MSC_VER # if _MSC_VER
fprintf(_f, "%u", (unsigned int)GetCurrentProcessId()); fprintf(file, "%u", (unsigned int)GetCurrentProcessId());
# else # else
fprintf(_f, "%u", (unsigned int)getpid()); fprintf(file, "%u", (unsigned int)getpid());
# endif # endif
fclose(_f); fclose(file);
} }
# ifndef NO_LOG # ifndef NO_LOG
@ -1647,10 +1644,6 @@ int setupListeningSockets()
int server_main(int argc, CARGV argv) int server_main(int argc, CARGV argv)
{ {
# if !defined(NO_RANDOM_EPID) || !defined(NO_CL_PIDS) || !defined(NO_INI_FILE)
KmsResponseParameters = (KmsResponseParam_t*)vlmcsd_malloc(sizeof(KmsResponseParam_t) * MIN_CSVLK);
memset(KmsResponseParameters, 0, sizeof(KmsResponseParam_t) * MIN_CSVLK);
# endif // !defined(NO_RANDOM_EPID) || !defined(NO_CL_PIDS) || !defined(NO_INI_FILE)
global_argc = argc; global_argc = argc;
global_argv = argv; global_argv = argv;
@ -1672,6 +1665,11 @@ int server_main(int argc, CARGV argv)
int newmain() int newmain()
{ {
# if !defined(NO_RANDOM_EPID) || !defined(NO_CL_PIDS) || !defined(NO_INI_FILE)
KmsResponseParameters = (KmsResponseParam_t*)vlmcsd_malloc(sizeof(KmsResponseParam_t) * MIN_CSVLK);
memset(KmsResponseParameters, 0, sizeof(KmsResponseParam_t) * MIN_CSVLK);
# endif // !defined(NO_RANDOM_EPID) || !defined(NO_CL_PIDS) || !defined(NO_INI_FILE)
// Initialize thread synchronization objects for Windows and Cygwin // Initialize thread synchronization objects for Windows and Cygwin
# ifdef USE_THREADS # ifdef USE_THREADS
@ -1769,6 +1767,10 @@ int newmain()
return NtServiceInstallation(installService, ServiceUser, ServicePassword); return NtServiceInstallation(installService, ServiceUser, ServicePassword);
# endif // _NTSERVICE # endif // _NTSERVICE
# ifndef NO_TAP
if (tapArgument && !InetdMode) startTap(tapArgument);
# endif // NO_TAP
# if !defined(NO_SOCKETS) && !defined(USE_MSRPC) # if !defined(NO_SOCKETS) && !defined(USE_MSRPC)
if (!InetdMode) if (!InetdMode)
{ {

@ -57,6 +57,7 @@ int server_main(int argc, CARGV argv);
#define INI_PARAM_MAINTAIN_CLIENTS 26 #define INI_PARAM_MAINTAIN_CLIENTS 26
#define INI_PARAM_START_EMPTY 27 #define INI_PARAM_START_EMPTY 27
#define INI_PARAM_DATA_FILE 28 #define INI_PARAM_DATA_FILE 28
#define INI_PARAM_VPN 29
#define INI_FILE_PASS_1 1 #define INI_FILE_PASS_1 1
#define INI_FILE_PASS_2 2 #define INI_FILE_PASS_2 2

@ -0,0 +1,367 @@
#ifndef _CRT_SECURE_NO_WARNINGS
#define _CRT_SECURE_NO_WARNINGS
#endif
#ifndef CONFIG
#define CONFIG "config.h"
#endif // CONFIG
#include CONFIG
#include "helpers.h"
#include "wintap.h"
#ifndef NO_TAP
#include "types.h"
#include "endian.h"
#include "output.h"
#include "tap-windows.h"
#include <iphlpapi.h>
static char* szIpAddress = "10.10.10.9";
static char* szMask = "30";
static char* szTapName;
static char *ActiveTapName, *AdapterClass;
static char* szLeaseDuration = "1d";
static uint32_t IpAddress, Mask, Network, Broadcast, DhcpServer; // These are host-endian (=little-endian) for easier calculations
static uint32_t Mtu;
static uint_fast8_t Cidr;
static HANDLE TapHandle;
static TapDriverVersion_t DriverVersion;
static IpPacket_t* IpPacket;
static uint32_t DhcpLeaseDuration;
static BOOL isAddressAssigned()
{
PMIB_IPADDRTABLE pIPAddrTable;
DWORD dwSize = 0;
BOOL result = FALSE;
pIPAddrTable = (PMIB_IPADDRTABLE)vlmcsd_malloc(sizeof(MIB_IPADDRTABLE));
DWORD status = GetIpAddrTable(pIPAddrTable, &dwSize, 0);
free(pIPAddrTable);
if (status != ERROR_INSUFFICIENT_BUFFER) return FALSE;
pIPAddrTable = (MIB_IPADDRTABLE *)vlmcsd_malloc(dwSize);
if (GetIpAddrTable(pIPAddrTable, &dwSize, 0))
{
free(pIPAddrTable);
return FALSE;
}
PMIB_IPADDRROW row;
for (row = pIPAddrTable->table; row < pIPAddrTable->table + pIPAddrTable->dwNumEntries; row++)
{
if (
row->dwAddr == BE32(IpAddress) &&
!(row->wType & (MIB_IPADDR_DELETED | MIB_IPADDR_DISCONNECTED | MIB_IPADDR_TRANSIENT))
)
{
result = TRUE;
break;
}
}
free(pIPAddrTable);
return result;
}
static void parseTapArgument(char* argument)
{
char* equalsignPosition = strchr(argument, (int)'=');
char* slashPosition = strchr(argument, (int)'/');
char* colonPosition = strchr(argument, (int)':');
szTapName = argument;
if (equalsignPosition)
{
*equalsignPosition = 0;
szIpAddress = equalsignPosition + 1;
}
if (slashPosition)
{
*slashPosition = 0;
szMask = slashPosition + 1;
}
if (colonPosition)
{
*colonPosition = 0;
szLeaseDuration = colonPosition + 1;
}
IpAddress = BE32(inet_addr(szIpAddress));
if (IpAddress == BE32(INADDR_NONE))
{
printerrorf("Fatal: %s is not a valid IPv4 address\n", szIpAddress);
exit(VLMCSD_EINVAL);
}
char* next;
Cidr = (uint8_t)strtol(szMask, &next, 10);
if (*next || Cidr < 8 || Cidr > 30)
{
printerrorf("Fatal: /%s is not a valid CIDR mask between /8 and /30\n", szMask);
exit(VLMCSD_EINVAL);
}
if (!((DhcpLeaseDuration = timeSpanString2Seconds(szLeaseDuration))))
{
printerrorf("Fatal: No valid time span specified in option -%c.\n", 'O');
exit(VLMCSD_EINVAL);
}
Mask = (uint32_t)~(UINT_MAX >> Cidr);
Network = IpAddress & Mask;
Broadcast = IpAddress | ~Mask;
DhcpServer = IpAddress + 1;
if (IpAddress <= Network || IpAddress + 1 >= Broadcast)
{
uint32_t lowerIpBE = BE32(Network + 1);
uint32_t upperIpBE = BE32(Broadcast - 2);
const char* szLower = vlmcsd_strdup(inet_ntoa(*(struct in_addr*)&lowerIpBE));
const char* szUpper = vlmcsd_strdup(inet_ntoa(*(struct in_addr*)&upperIpBE));
printerrorf("Fatal: For this subnet the IPv4 address must be ");
if (lowerIpBE == upperIpBE)
{
printerrorf("%s\n", szLower);
}
else
{
printerrorf("between %s and %s\n", szLower, szUpper);
}
exit(VLMCSD_EINVAL);
}
}
__noreturn static void WinErrorExit(DWORD error)
{
printerrorf("Registry read error: %s\n", win_strerror((int)error));
exit(error);
}
static HANDLE OpenTapHandle()
{
HANDLE handle = INVALID_HANDLE_VALUE;
HKEY regAdapterKey;
DWORD regResult;
if ((regResult = RegOpenKeyEx(HKEY_LOCAL_MACHINE, ADAPTER_KEY, 0, KEY_READ | KEY_WOW64_64KEY, &regAdapterKey)) != ERROR_SUCCESS)
{
WinErrorExit(regResult);
}
char subkeyName[TAP_REGISTRY_DATA_SIZE];
DWORD i, subKeySize = sizeof(subkeyName);
for (i = 0; (regResult = RegEnumKeyEx(regAdapterKey, i, subkeyName, &subKeySize, NULL, NULL, NULL, NULL)) != ERROR_NO_MORE_ITEMS; i++)
{
HKEY regSubKey;
DWORD type, regDataSize;
char regData[TAP_REGISTRY_DATA_SIZE];
if (regResult) WinErrorExit(regResult);
if ((regResult = RegOpenKeyEx(regAdapterKey, subkeyName, 0, KEY_READ | KEY_WOW64_64KEY, &regSubKey)) == ERROR_SUCCESS)
{
regDataSize = sizeof(regData);
if (RegQueryValueEx(regSubKey, "ComponentId", NULL, &type, (LPBYTE)regData, &regDataSize) == ERROR_SUCCESS)
{
if (
type == REG_SZ &&
(
!strncmp(regData, "tap0801", sizeof(regData)) ||
!strncmp(regData, "tap0901", sizeof(regData)) ||
!strncmp(regData, "TEAMVIEWERVPN", sizeof(regData))
)
)
{
AdapterClass = vlmcsd_strdup(regData);
regDataSize = sizeof(regData);
if (RegQueryValueEx(regSubKey, "NetCfgInstanceId", NULL, &type, (LPBYTE)regData, &regDataSize) == ERROR_SUCCESS && type == REG_SZ)
{
HKEY connectionKey;
char connectionKeyName[TAP_REGISTRY_DATA_SIZE];
strncpy(connectionKeyName, NETWORK_CONNECTIONS_KEY "\\", sizeof(connectionKeyName));
strncat(connectionKeyName, regData, sizeof(connectionKeyName));
strncat(connectionKeyName, "\\Connection", sizeof(connectionKeyName));
if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, connectionKeyName, 0, KEY_READ | KEY_WOW64_64KEY, &connectionKey) == ERROR_SUCCESS)
{
char deviceName[TAP_REGISTRY_DATA_SIZE];
regDataSize = sizeof(deviceName);
if (RegQueryValueEx(connectionKey, "Name", NULL, &type, (LPBYTE)deviceName, &regDataSize) == ERROR_SUCCESS && type == REG_SZ)
{
if (!strcmp(szTapName, ".") || !strncasecmp(szTapName, deviceName, sizeof(deviceName)))
{
ActiveTapName = vlmcsd_strdup(deviceName);
strncpy(deviceName, USERMODEDEVICEDIR, sizeof(deviceName));
strncat(deviceName, regData, sizeof(deviceName));
strncat(deviceName, strcmp(AdapterClass, "TEAMVIEWERVPN") ? TAP_WIN_SUFFIX : ".dgt", sizeof(deviceName));
handle = CreateFile(deviceName, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_SYSTEM, NULL);
}
}
}
RegCloseKey(connectionKey);
}
if (handle == INVALID_HANDLE_VALUE) free(AdapterClass);
}
}
}
RegCloseKey(regSubKey);
subKeySize = sizeof(subkeyName);
if (handle != INVALID_HANDLE_VALUE) break;
}
RegCloseKey(regAdapterKey);
if (handle == INVALID_HANDLE_VALUE)
{
printerrorf("Fatal: No compatible VPN adapter");
if (!strcmp(szTapName, "."))
{
printerrorf("s");
}
else
{
printerrorf(" with name \"%s\"", szTapName);
}
printerrorf(" available for use\n");
exit(ERROR_DEVICE_NOT_AVAILABLE);
}
return handle;
}
static int DevCtl(DWORD code, void* data, DWORD len)
{
if (!DeviceIoControl(TapHandle, code, data, len, data, len, &len, NULL))
{
DWORD error = GetLastError();
printerrorf("Fatal: VPN adapter error: %s\n", win_strerror(error));
exit(error);
}
return len;
}
static DWORD WINAPI TapMirror(LPVOID data)
{
while (TRUE)
{
DWORD bytesRead, bytesWritten;
if (!ReadFile(TapHandle, IpPacket, Mtu, &bytesRead, NULL)) break;
uint32_t temp = IpPacket->ip_src;
IpPacket->ip_src = IpPacket->ip_dst;
IpPacket->ip_dst = temp;
if (!WriteFile(TapHandle, IpPacket, bytesRead, &bytesWritten, NULL)) break;
# if !defined(NO_LOG) && defined(_PEDANTIC)
if (bytesRead != bytesWritten) logger("Warning: VPN device \"%s\": %u bytes could not be written\n", ActiveTapName, bytesRead - bytesWritten);
# endif // !defined(NO_LOG) && defined(_PEDANTIC)
}
DWORD error = GetLastError();
# ifndef NO_LOG
logger("Warning: VPN thread for device \"%s\" exiting: %s\n", ActiveTapName, win_strerror(error));
# endif // NO_LOG
free(ActiveTapName);
CloseHandle(TapHandle);
return error;
}
void startTap(char* const argument)
{
if (!strcmp(argument, "-")) return;
parseTapArgument(argument);
TapHandle = OpenTapHandle();
// Get MTU and driver version
DevCtl(TAP_WIN_IOCTL_GET_MTU, &Mtu, sizeof(Mtu));
DevCtl(TAP_WIN_IOCTL_GET_VERSION, &DriverVersion, sizeof(DriverVersion));
// Configure TUN mode
TapConfigTun_t tapTunCfg;
tapTunCfg.Address.s_addr = BE32(IpAddress);
tapTunCfg.Network.s_addr = BE32(Network);
tapTunCfg.Mask.s_addr = BE32(Mask);
DevCtl(TAP_WIN_IOCTL_CONFIG_TUN, &tapTunCfg, sizeof(tapTunCfg));
// Setup the drivers internal DHCP server
TapConfigDhcp_t tapDhcpCfg;
tapDhcpCfg.Address.s_addr = BE32(IpAddress);
tapDhcpCfg.Mask.s_addr = BE32(Mask);
tapDhcpCfg.DhcpServer.s_addr = BE32(IpAddress + 1);
tapDhcpCfg.LeaseDuration = DhcpLeaseDuration;
DevCtl(TAP_WIN_IOCTL_CONFIG_DHCP_MASQ, &tapDhcpCfg, sizeof(tapDhcpCfg));
// Connect the virtual network cable
BOOL isCableConnected = TRUE;
DevCtl(TAP_WIN_IOCTL_SET_MEDIA_STATUS, &isCableConnected, sizeof(isCableConnected));
// Allocate buffer and start mirror thread
IpPacket = (IpPacket_t*)vlmcsd_malloc(Mtu);
HANDLE threadHandle = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)TapMirror, NULL, 0, NULL);
if (!threadHandle)
{
DWORD error = GetLastError();
printerrorf("Fatal: Unable to start VPN thread: %s\n", win_strerror(error));
exit(error);
}
CloseHandle(threadHandle);
# ifndef NO_LOG
logger("%s %u.%u.%u device \"%s\" started\n", AdapterClass, DriverVersion.Major, DriverVersion.Minor, DriverVersion.Build, ActiveTapName);
# endif // NO_LOG
DWORD i;
BOOL isAssigned;
// Wait up to 4 seconds until the IP address is up and running
// so vlmcsd can actually bind to and listen on it
for (i = 0; !((isAssigned = isAddressAssigned())) && i < 20; i++) Sleep(200);
if (!isAssigned)
{
printerrorf("Warning: IPv4 address %s not assigned\n", szIpAddress);
}
else
{
# ifndef NO_LOG
logger("IPv4 address %s assigned\n", szIpAddress);
# endif // NO_LOG
}
}
#endif // NO_TAP

@ -0,0 +1,50 @@
#ifndef __WINTAP_H
#define __WINTAP_H
#define TAP_REGISTRY_DATA_SIZE 256
// Network-Endian (= Big-Endian)
typedef struct TapConfigTun
{
struct in_addr Address;
struct in_addr Network;
struct in_addr Mask;
} TapConfigTun_t, *PTapConfigTun_t;
// Network-Endian (= Big-Endian), except LeaseDuration
typedef struct TapConfigDhcp
{
struct in_addr Address;
struct in_addr Mask;
struct in_addr DhcpServer;
uint32_t LeaseDuration; // Host-Endian (=Little-Endian). Anything else is Big-Endian
} TapConfigDhcp_t, *PTapConfigDhcp_t;
typedef struct TapDriverVersion
{
uint32_t Major;
uint32_t Minor;
uint32_t Build;
uint32_t Revision;
} TapDriverVersion_t, *PTapDriverVersion_t;
// Network-Endian (= Big-Endian)
typedef struct IpPacket {
uint8_t ip_hl : 4, /* header length */
ip_v : 4; /* version */
uint8_t ip_tos; /* type of service */
int16_t ip_len; /* total length */
uint16_t ip_id; /* identification */
int16_t ip_off; /* fragment offset field */
uint8_t ip_ttl; /* time to live */
uint8_t ip_p; /* protocol */
uint16_t ip_sum; /* checksum */
uint32_t ip_src, ip_dst; /* source and dest address */
uint8_t payload[0];
} IpPacket_t, *PIpPacket_t;
void startTap(char* const argument);
#endif //__WINTAP_H
Loading…
Cancel
Save