You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Proxmark3GUI/lang/zh_CN.ts

882 lines
36 KiB
XML

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN">
<context>
<name>MF_Attack_hardnestedDialog</name>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="14"/>
<source>Hardnested Attack</source>
<translation>Hardnested攻击</translation>
</message>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="20"/>
<source>Known Block:</source>
<translation>已知块:</translation>
</message>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="29"/>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="104"/>
<source>Block:</source>
<translation>块:</translation>
</message>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="68"/>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="143"/>
<source>A</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="73"/>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="148"/>
<source>B</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_attack_hardnesteddialog.ui" line="95"/>
<source>Target Block:</source>
<translation>目标块:</translation>
</message>
</context>
<context>
<name>MF_Sim_simDialog</name>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="14"/>
<source>Simulate</source>
<translation>模拟</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="37"/>
<source>u</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="66"/>
<source>UID 4 or 7 bytes. If not specified, the UID 4B from emulator memory will be used</source>
<translation>4或7字节的UID如果不指定则使用模拟器内存中的4字节UID</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="87"/>
<source>n</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="116"/>
<source>Automatically exit simulation after &lt;numreads&gt; blocks have been read by reader. 0 = infinite</source>
<translation>在读卡器读取&lt;n&gt;个块后自动退出模拟n为0或不指定时永远不退出</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="137"/>
<source>i</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="150"/>
<source>Interactive, means that console will not be returned until simulation finishes or is aborted</source>
<translation>交互模式勾选后PM3客户端将在模拟完成或者模拟中断后才可继续使用</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="171"/>
<source>x</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="184"/>
<source>Crack, performs the &apos;reader attack&apos;, nr/ar attack against a legitimate reader, fishes out the key(s)</source>
<translation>破解对读卡器进行攻击通过nr/ar攻击来钓出密码(无卡嗅探)</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="205"/>
<source>e</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="218"/>
<source>set keys found from &apos;reader attack&apos; to emulator memory (implies x and i)</source>
<translation>在获得密码后自动将密码写入模拟器内存自动勾选x和i</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="239"/>
<source>f</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="268"/>
<source>get UIDs to use for &apos;reader attack&apos; from file &apos;f &lt;filename.txt&gt;&apos; (implies x and i)</source>
<translation>&lt;filename.txt&gt;当中获取用于破解读卡器的UID批量模拟自动勾选x和i</translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="289"/>
<source>r</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_sim_simdialog.ui" line="302"/>
<source>Generate random nonces instead of sequential nonces. Standard reader attack won&apos;t work with this option, only moebius attack works</source>
<translation>生成随机nonce而不是顺序的nonce这种情况下PM3将不对读卡器进行标准攻击只进行moebius攻击</translation>
</message>
</context>
<context>
<name>MF_UID_parameterDialog</name>
<message>
<location filename="../ui/mf_uid_parameterdialog.ui" line="14"/>
<source>Set Parameter</source>
<translation>设置卡参数</translation>
</message>
<message>
<location filename="../ui/mf_uid_parameterdialog.ui" line="22"/>
<source>UID:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_uid_parameterdialog.ui" line="32"/>
<source>ATQA:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_uid_parameterdialog.ui" line="42"/>
<source>SAK:</source>
<translation></translation>
</message>
</context>
<context>
<name>MF_trailerDecoderDialog</name>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="14"/>
<source>Trailer Decoder</source>
<translation>Trailer解码</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="22"/>
<source>Blocks</source>
<translation>块大小</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="28"/>
<source>4</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="38"/>
<source>16</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="67"/>
<source>Trailer Data:
(like &quot;FF0780&quot; or &quot;FF 07 80&quot;)</source>
<translation>输入Access Bits
形如“FF0780”或“FF 07 80”</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="120"/>
<source>Or set bits manually</source>
<translation>手动设置访问情况:</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="134"/>
<source>Cx0</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="155"/>
<source>Cx1</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="176"/>
<source>Cx2</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="197"/>
<source>Cx3</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="235"/>
<source>Data Block Permission:</source>
<translation>数据Block访问权限</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="252"/>
<source>Block0</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="257"/>
<source>Block1</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="262"/>
<source>Block2</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="267"/>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="307"/>
<source>Read</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="272"/>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="312"/>
<source>Write</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="277"/>
<source>Increase</source>
<translation>增加</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="282"/>
<source>Decrease/Transfer/Restore</source>
<translation>减少/从缓冲区写入/读入至缓冲区</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="290"/>
<source>Trailer Block Permission:</source>
<translation>Trailer访问权限</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="317"/>
<source>KeyA</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="322"/>
<source>Access Bits</source>
<translation>Access Bits</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="327"/>
<source>KeyB</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="337"/>
<source>Reference:
MF1S70YYX_V1 Product data sheet
Rev. 3.2 — 23 November 2017</source>
<translation>参考资料:
MF1S70YYX_V1 Product data sheet
Rev. 3.2 — 23 November 2017</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.ui" line="358"/>
<source>Note:the Access Bits usually contains 4 bytes(8 hex symbols), but only the first 3 bytes matters. You can set the 4th byte randomly.</source>
<translation>注意Access Bits一般包含4个字节8个16进制字符但只有前3个字节决定访问情况最后一个字节可任意设置。</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.cpp" line="43"/>
<source>Invalid!
It could make the whole sector blocked irreversibly!</source>
<translation>无效!
可能导致整个扇区被不可逆转地锁定!</translation>
</message>
<message>
<location filename="../ui/mf_trailerdecoderdialog.cpp" line="52"/>
<source>Valid</source>
<translation>有效</translation>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<location filename="../ui/mainwindow.ui" line="23"/>
<source>Proxmark3GUI</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="56"/>
<source>Path:</source>
<translation>路径:</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="82"/>
<source>Refresh</source>
<translation>刷新端口</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="95"/>
<source>Connect</source>
<translation>连接</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="108"/>
<source>Disconnect</source>
<translation>断开</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="127"/>
<source>Mifare</source>
<translation>Mifare(IC)卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="209"/>
<source>Select Trailer</source>
<translation>选中密码块</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="347"/>
<source>Card Type</source>
<translation>卡类型</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="368"/>
<source>MINI</source>
<extracomment>320</extracomment>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="381"/>
<source>1K</source>
<extracomment>1024</extracomment>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="397"/>
<source>2K</source>
<extracomment>2048</extracomment>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="410"/>
<source>4K</source>
<extracomment>4096</extracomment>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="420"/>
<source>File</source>
<translation>文件</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="441"/>
<location filename="../ui/mainwindow.ui" line="1134"/>
<source>Load</source>
<translation>加载</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="454"/>
<location filename="../ui/mainwindow.ui" line="1147"/>
<source>Save</source>
<translation>保存</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="474"/>
<location filename="../ui/mainwindow.cpp" line="814"/>
<source>Data</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="484"/>
<source>Key</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="494"/>
<source>Attack</source>
<translation>破解</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="528"/>
<source>Card Info</source>
<translation>读卡片信息</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="541"/>
<source>Check Default</source>
<translation>验证默认密码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="554"/>
<source>Nested</source>
<translation>Nested攻击</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="567"/>
<source>Hardnested</source>
<translation>Hardested攻击</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="592"/>
<source>Read/Write</source>
<translation>读/写</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="605"/>
<source>Block:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="637"/>
<source>Key:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="656"/>
<source>Key Type:</source>
<translation>Key类型</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1108"/>
<source>Snoop</source>
<translation>嗅探(Snoop)</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1121"/>
<source>List Data</source>
<translation>列出嗅探数据</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="679"/>
<source>Data:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="701"/>
<source>Normal(Require Password)</source>
<translation>普通卡(需要密码)</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="783"/>
<source>Dump</source>
<translation>Dump命令</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="802"/>
<source>Restore</source>
<translation>Restore命令</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="812"/>
<source>Chinese Magic Card(Without Password)</source>
<translation>UID卡不需要密码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="833"/>
<source>Lock UFUID Card</source>
<translation>锁定UFUID卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="846"/>
<location filename="../ui/mainwindow.cpp" line="651"/>
<source>About UID Card</source>
<translation>关于UID卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="917"/>
<source>Set Parameter</source>
<translation>设置卡参数</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="936"/>
<source>Wipe</source>
<translation>擦除</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="962"/>
<location filename="../ui/mainwindow.ui" line="1038"/>
<source>Simulate</source>
<translation>模拟</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="467"/>
<location filename="../ui/mainwindow.ui" line="1025"/>
<source>Clear</source>
<translation>清空</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="202"/>
<source>Select All</source>
<translation>全选</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="238"/>
<source>KeyBlocks-&gt;Key</source>
<translation>密码区-&gt;密码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="251"/>
<source>KeyBlocks&lt;-Key</source>
<translation>密码区&lt;-密码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="264"/>
<source>Fill Keys</source>
<translation>填充密码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="277"/>
<source>Trailer Decoder</source>
<translation>Trailer解码</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="290"/>
<source>Set Fonts</source>
<translation>设置字体</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="725"/>
<location filename="../ui/mainwindow.ui" line="859"/>
<source>Read One</source>
<translation>读取单个区</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="738"/>
<location filename="../ui/mainwindow.ui" line="872"/>
<source>Write One</source>
<translation>写入单个区</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="751"/>
<location filename="../ui/mainwindow.ui" line="885"/>
<location filename="../ui/mainwindow.ui" line="1012"/>
<source>Read Selected</source>
<translation>读取选中块</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="764"/>
<location filename="../ui/mainwindow.ui" line="898"/>
<location filename="../ui/mainwindow.ui" line="999"/>
<source>Write Selected</source>
<translation>写入选中块</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1061"/>
<location filename="../ui/mainwindow.ui" line="1095"/>
<source>Sniff</source>
<translation>嗅探</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1173"/>
<source>RawCommand</source>
<translation>原始命令</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1220"/>
<location filename="../ui/mainwindow.cpp" line="149"/>
<source>History:</source>
<translation>命令历史:</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1252"/>
<source>ClearHistory</source>
<translation>清空历史</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1271"/>
<source>Send</source>
<translation>发送</translation>
</message>
<message>
<location filename="../ui/mainwindow.ui" line="1278"/>
<source>ClearOutput</source>
<translation>清空输出</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="81"/>
<location filename="../ui/mainwindow.cpp" line="188"/>
<location filename="../ui/mainwindow.cpp" line="414"/>
<location filename="../ui/mainwindow.cpp" line="434"/>
<location filename="../ui/mainwindow.cpp" line="447"/>
<location filename="../ui/mainwindow.cpp" line="466"/>
<location filename="../ui/mainwindow.cpp" line="479"/>
<location filename="../ui/mainwindow.cpp" line="502"/>
<location filename="../ui/mainwindow.cpp" line="515"/>
<location filename="../ui/mainwindow.cpp" line="709"/>
<location filename="../ui/mainwindow.cpp" line="728"/>
<source>Info</source>
<translation>信息</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="81"/>
<source>Plz choose a port first</source>
<translation>请先选择端口</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="96"/>
<source>Connected</source>
<translation>已连接</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="101"/>
<location filename="../ui/mainwindow.cpp" line="111"/>
<location filename="../ui/mainwindow.cpp" line="804"/>
<source>Not Connected</source>
<translation>未连接</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="460"/>
<source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml);;All Files(*.*)</source>
<translation>二进制Data文件(*.bin *.dump);;文本Data文件(*.txt *.eml);;所有文件(*.*)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="466"/>
<location filename="../ui/mainwindow.cpp" line="479"/>
<location filename="../ui/mainwindow.cpp" line="709"/>
<source>Failed to open</source>
<translation>无法打开</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="188"/>
<source>Continue?</source>
<translation>确定?</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="10"/>
<source>Check Update</source>
<translation>检查更新</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="188"/>
<source>Some of the data and key will be cleared.</source>
<translation>部分数据和密码将被清除</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="301"/>
<source>Plz select the font of data widget and key widget</source>
<translation>请选择Data窗口和Key窗口的字体</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="414"/>
<source>Data must consists of 32 Hex symbols(Whitespace is allowed)</source>
<translation>Data必须由32个十六进制字符组成中间可含有空格</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="434"/>
<location filename="../ui/mainwindow.cpp" line="447"/>
<source>Key must consists of 12 Hex symbols(Whitespace is allowed)</source>
<translation>Key必须由12个十六进制字符组成中间可含有空格</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="459"/>
<source>Plz select the data file:</source>
<translation>请选择data文件</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="472"/>
<source>Plz select the key file:</source>
<translation>请选择key文件</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="473"/>
<source>Binary Key Files(*.bin *.dump);;Binary Data Files(*.bin *.dump);;All Files(*.*)</source>
<translation>二进制Key文件(*.bin *.dump)二进制Data文件(*.bin *.dump);;所有文件(*.*)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="495"/>
<source>Plz select the location to save data file:</source>
<translation>请选择文件保存的位置:</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="496"/>
<source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml)</source>
<translation>二进制Data文件(*.bin *.dump);;文本Data文件(*.txt *.eml)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="502"/>
<location filename="../ui/mainwindow.cpp" line="515"/>
<location filename="../ui/mainwindow.cpp" line="728"/>
<source>Failed to save to</source>
<translation>无法保存至</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="508"/>
<source>Plz select the location to save key file:</source>
<translation>请选择key文件保存的位置</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="509"/>
<source>Binary Key Files(*.bin *.dump)</source>
<translation>二进制Key文件(*.bin *.dump)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="636"/>
<source> Normally, the Block 0 of a typical Mifare card, which contains the UID, is locked during the manufacture. Users cannot write anything to Block 0 or set a new UID to a normal Mifare card.</source>
<translation> 普通Mifare卡的Block0无法写入UID也不能更改</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="637"/>
<source> Chinese Magic Cards(aka UID Cards) are some special cards whose Block 0 are writeable. And you can change UID by writing to it.</source>
<translation> UID卡在国外叫Chinese Magic Card的Block0可写UID可变</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="639"/>
<source>There are two versions of Chinese Magic Cards, the Gen1 and the Gen2.</source>
<translation>国外把UID卡分为Chinese Magic Card Gen1和Gen2</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="640"/>
<source> Gen1:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="640"/>
<source> also called UID card in China. It responses to some backdoor commands so you can access any blocks without password. The Proxmark3 has a bunch of related commands(csetblk, cgetblk, ...) to deal with this type of card, and my GUI also support these commands.</source>
<translation> 指通常所说的UID卡可以通过后门指令直接读写块而无需密码在PM3和此GUI中有特殊命令处理这类卡片</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="641"/>
<source> Gen2:</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="641"/>
<source> doesn&apos;t response to the backdoor commands, which means that a reader cannot detect whether it is a Chinese Magic Card or not by sending backdoor commands.</source>
<translation> 这个叫法在国内比较罕见在国外指CUID/FUID/UFUID这类对后门指令不响应的卡防火墙卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="643"/>
<source>There are some types of Chinese Magic Card Gen2.</source>
<translation>以下是Gen2卡的详细介绍</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="644"/>
<source> CUID Card:</source>
<translation> CUID卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="644"/>
<source> the Block 0 is writeable, you can write to this block repeatedly by normal wrbl command.</source>
<translation> 可通过普通的写块命令来写Block0可重复擦写</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="645"/>
<source> (hf mf wrbl 0 A FFFFFFFFFFFF &lt;the data you want to write&gt;)</source>
<translation> (hf mf wrbl 0 A FFFFFFFFFFFF &lt;待写入数据&gt;)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="646"/>
<source> FUID Card:</source>
<translation> FUID卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="646"/>
<source> you can only write to Block 0 once. After that, it seems like a typical Mifare card(Block 0 cannot be written to).</source>
<translation> Block0只能写入一次</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="647"/>
<source> (some readers might try changing the Block 0, which could detect the CUID Card. In that case, you should use FUID card.)</source>
<translation> (更高级的穿防火墙卡可以过一些能识别出CUID卡的读卡器)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="648"/>
<source> UFUID Card:</source>
<translation> UFUID卡</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="648"/>
<source> It behaves like a CUID card(or UID card? I&apos;m not sure) before you send some special command to lock it. Once it is locked, you cannot change its Block 0(just like a typical Mifare card).</source>
<translation> 锁卡前和普通UID/CUID卡一样可以反复读写Block0用特殊命令锁卡后就和FUID卡一样了</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="650"/>
<source> Seemingly, these Chinese Magic Cards are more easily to be compromised by Nested Attack(it takes little time to get an unknown key).</source>
<translation> 所有UID卡都似乎更容易被Nested攻击破解</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="696"/>
<source>Plz select the trace file:</source>
<translation>请选择trace文件</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="697"/>
<source>Trace Files(*.trc);;All Files(*.*)</source>
<translation>Trace文件(*.trc);;所有文件(*.*)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="719"/>
<source>Plz select the location to save trace file:</source>
<translation>请选择trace文件保存的位置</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="720"/>
<source>Trace Files(*.trc)</source>
<translation>Trace文件(*.trc)</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="805"/>
<location filename="../ui/mainwindow.cpp" line="960"/>
<source>Idle</source>
<translation>空闲</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="812"/>
<location filename="../ui/mainwindow.cpp" line="821"/>
<source>Sec</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="813"/>
<source>Blk</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="822"/>
<source>KeyA</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="823"/>
<source>KeyB</source>
<translation></translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="897"/>
<source>HW Version:</source>
<translation>固件版本:</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="899"/>
<source>PM3:</source>
<translation>连接状态:</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="901"/>
<source>State:</source>
<translation>运行状态:</translation>
</message>
<message>
<location filename="../ui/mainwindow.cpp" line="956"/>
<source>Running</source>
<translation>运行中</translation>
</message>
</context>
<context>
<name>Mifare</name>
<message>
<location filename="../module/mifare.cpp" line="592"/>
<source>Success!</source>
<translation>成功!</translation>
</message>
<message>
<location filename="../module/mifare.cpp" line="219"/>
<location filename="../module/mifare.cpp" line="592"/>
<location filename="../module/mifare.cpp" line="596"/>
<location filename="../module/mifare.cpp" line="661"/>
<source>Info</source>
<translation>信息</translation>
</message>
<message>
<location filename="../module/mifare.cpp" line="219"/>
<source>Plz provide at least one known key</source>
<translation>请至少提供一个已知密码</translation>
</message>
<message>
<location filename="../module/mifare.cpp" line="443"/>
<location filename="../module/mifare.cpp" line="596"/>
<source>Failed!</source>
<translation>失败!</translation>
</message>
<message>
<location filename="../module/mifare.cpp" line="661"/>
<source>Failed to read card.</source>
<translation>读卡失败。</translation>
</message>
</context>
</TS>