Proxmark3GUI

A cross-platform GUI for Proxmark3/Proxmark3 Iceman fork client

(The orignal Proxmark3 repo has been unmaintained for a long time. I personally suggest using the Proxmark3 Iceman fork)

中文介绍

---

Features

• Easy to find available Serial Port
• Support raw commands of Proxmark3 client(Official/Iceman)
• Have a friendly UI to test Mifare cards
  • Support different card size(MINI, 1K, 2K, 4K)
  • Easy to edit Mifare block data
  • Easy to read all/selected blocks with well-designed read logic
  • Easy to write all/selected blocks
  • Support binary(.bin .dump) files and text(.eml) files
  • Analyze Access Bits
  • Support Chinese Magic Card
• Have basic support for LF commands
• Customize UI
• ...

---

Preview

more previews

---

About Iceman fork/repo

The Iceman fork/repo has more powerful functions. These guys even developed a new hardware called Proxmark3 RDV4 with smart card support. But the official repo and the Iceman repo is not fully compatible.
This GUI is compatible with Iceman/RRG repo(tested on v4.13441, v4.15864)

---

About Compiled Windows clients

A cool guy Gator96100 creates ProxSpace and makes it possible to compile both the firmware and the client on Windows.
Also, he makes the pre-compiled Windows client so you can download it and run your PM3 client on Windows instantly.
I included his compiled client in my releases so you can use the GUI on the fly, and you can also use the GUI with your prefered client.
Great thanks to him.

---

Download binaries for Windows

You can download pre-built Windows binaries in release page
Vx.x.x-win64.7z only contains the GUI
Vx.x.x-win64-xxxxxxx.7z contains the GUI and corresponding client. You just need to open Vx.x.x-win64-xxxxxxx\GUI\Proxmark3GUI.exe

You can also download them in SourceForge

Build on Linux

cd ~
sudo apt-get update
sudo apt-get install qt5-default libqt5serialport5 libqt5serialport5-dev 
git clone https://github.com/wh201906/Proxmark3GUI.git --depth=1
cd Proxmark3GUI
mkdir build && cd build
qmake ../src
make -j4 && make clean
./Proxmark3GUI

Build on macOS

cd ~
brew update
brew install qt@5
brew link qt5 --force
git clone https://github.com/wh201906/Proxmark3GUI.git --depth=1
cd Proxmark3GUI
mkdir build && cd build
qmake ../src
make -j4 && make clean
open Proxmark3GUI.app

In order for the GUI to connect to the device in macOS, you'd need to tweak the settings a little bit

---

Tutorial

1.Quickstart
2.Edit Mifare Classic data(Proxmark3 hardware is not necessary)

---

Change Log

Change Log